How To Install TWRP Recovery On Samsung Galaxy Note 3

Samsung Galaxy Note 3 is one of the flagship phones of the Samsung manufacturer. Many developers come with many tweaks, especially for this handset. To flash the custom ROMs, mods, etc definitely you will need a custom recovery.

That’s why I thought to write-up an article for that. Please be note that this tutorial is compatible only for Samsung Galaxy Note 3 (N900/9005/900T/900P/900W8) variants only. So, don’t make a try on other variants. If you do so, it may give undesirable consequences (not sure about that).


Since TWRP recovery works fine in all Android versions of Samsung Galaxy Note 3, you no need to worry about that.


1.Before try this process, just make a backup of all your important data’s like Contacts, Call register, SMS, MMS, etc. This step is highly recommended to do, so then if anything goes wrong you can get back all your data’s with the help of backup.

2.Then ensure the battery percentage level of your Samsung Galaxy Note 3 is not less than 75%. If it is low, charge them fully and then try the rooting process in that.

3.Next disable or turn off the anti-virus and other security firewalls to prevent the connection issues.

4.Use only OEM data cable to connect your Samsung Galaxy Note 3 to the computer.

5.Enable the USB debugging option on your phone.

6.Download and Install Samsung USB Drivers on your computer.

7.Finally, make sure you are implementing this procedure only the device I have mentioned above. To check your device model number Go to Settings > More > About Device.

Disclaimer : Follow the given below procedure at your own risk. I would not be held responsible for any damage.

Required files to download:

1.Odin – Download the Odin from here and extract the same.

2.Then download TWRP Recovery from here based on your variants:

(a)International Galaxy Note 3 SM-N900

(b)Canadian Galaxy Note 3 SM-N900W8

(c)LTE Galaxy Note 3 SM-N9005

(d)Sprint Galaxy Note 3 SM-N900P

(e)T-Mobile Galaxy Note 3 SM-N900T

Procedure to Install TWRP Recovery on Samsung Galaxy Note 3:

1.Download the exact file for your variant.

2.Next open Odin3.exe. Put your phone in the download mode by turning it OFF completely.

3.Again turn it ON by pressing and holding the Volume Down button, Home button, and Power button.

4.Now you will see a warning message, press volume up button to continue.

5.After that connect your phone to the computer. Once the Odin section detects your phone, the ID: COM will turn into blue color.

6.Then click the PDA tab in Odin and select the downloaded recovery.tar file and allow it to load.

7.Tap the start button after few seconds the process will be complete, and it will reboot automatically.

8.Next press and hold the Volume Up button, Home button and Power button to access the TWRP touch recovery that you just installed.

9.That’s it! Now, you have successfully installed the TWRP recovery on your phone. Here after using this recovery you can backup your current ROM available on your phone as well as other data’s.

10.Also don’t forget to make an EFS backup and save it in your computer. Find the option in TWRP recovery.

About Petr

Petr Kudlacek runs this android root guide blog. Get android rooting tips, tutorials, ROM installation tutorials here.

Speak Your Mind


Show Buttons
Share On Facebook
Share On Twitter
Share On Google Plus
Hide Buttons